https://centraljetcharter.com/phenom-100e.html
PHENOM 100E Information
It features large leather seats that include arm rests, power outlets and multiple controls at you fingertips.
This Jet has nice-looking wood finishing that is consistent throughout. The "Phenom’s 100" interior can be configured using seven pre-defined factory options.
The Phenom 100E is great for small companies traveling short distances, the Phenom 100 is a great value.
Phemon 100E Flights
phenom 100e cabin, phenom 100e inside, phenom 100e interior, private jets, charter aircraft
Embraer’s conservative airframe design philosophy dictated the use of conventional high-strength aluminum alloys for the primary airframe.
But that didn’t limit the freedom of the firm’s aero engineers in optimizing the Phenom 100E’s external shape for low drag.
The Phenom 100e for very light jet charter.
ReplyDeletePlease contact us for the Phenom 100e.
ReplyDeletePhenom 100e private aircraft charter.
ReplyDelete
ReplyDeletePhemon 100E Exterior
phenom 100e flying in sky, phenom 100e exterior, very light jet charter
This enables it to fabricate large, single-piece components, many with compound curves so vital to drag reduction.
Robotic riveters and other automated processes cut the number of assembly hours required to build the aircraft, thus reducing the cost.
The fuselage cross-section has an Embraer-original “Oval Lite” shape to optimize available room for seated passengers while minimizing external wetted area.
The aft fuselage has many complex curves, including shallow wells adjacent to the nacelles, intended to reduce high-speed drag hot spots. Transonic flow in such areas otherwise would create wave drag.
The wing structure passes entirely below the fuselage, so it doesn’t intrude into the passenger cabin.
Use of composites is limited mainly to secondary structures. Carbon fiber, for instance, is used to build the vertical and horizontal tail boxes, including internal spars and stressed skins.
The vertical tail also has upper and lower chord-wise aluminum ribs. The front of the vertical tail has a radio-wave transparent fiberglass fairing to accommodate an optional HF transceiver antenna.
Carbon fiber and other composites are used for secondary structures, including aerodynamic fairings, the nose radome and some non-pressurized access doors.
Long-life LEDs are used for most exterior and interior lighting. Cabin lighting includes reading, overhead wash and aisle lights.